
A curbless (zero-entry) shower has no curb to step over: the bathroom floor runs into the shower and slopes to a drain, often a linear drain. The U.S. Access Board notes that trench drains and flush transitions give easier access than even a 1/2-inch beveled threshold.
Curbless showers are popular in Scottsdale remodels for looks and for aging in place. For our work, see accessible bathroom remodeling.
| Item | Figure | Source |
|---|---|---|
| Threshold allowed (beveled) | Up to 1/2 in | U.S. Access Board |
| Standard roll-in shower | 30 in x 60 in minimum | U.S. Access Board |
| Clearance in front | 30 in x 60 in minimum | U.S. Access Board |
| Grab bar height | 33–36 in | 2010 ADA Standards 609 |
| Grab bar strength | 250 lb | 2010 ADA Standards 609 |
From the U.S. Access Board guide and 2010 ADA Standards 609. These are public-accommodation standards, used here as a design guide.
See frameless shower doors and the bathroom remodel cost guide.
No; the ADA Standards cover public and commercial facilities, but many homeowners use them as a guide.
The 2010 ADA Standards set a standard roll-in shower at 30 inches by 60 inches minimum.
The ADA Standards place them 33 to 36 inches above the floor, rated for 250 pounds.
Often the shower area is recessed or the floor built up so water flows to the drain; we check the structure.
Correct slope and a linear drain at the entry keep it in; glass helps too.
We measure the room, look at what is behind the walls where we can, and give you a written estimate.
Free estimate, no obligation
Checked November 18, 2026.
More guides: bathroom guides · Services: Bathroom Remodeling, walk-in shower installation, tub-to-shower conversion, bathroom tile installation, vanity & countertop installation, accessible bathroom remodeling